Lobby and Flat modules

A Comprehensive fire safety system for Residential infrastructure

Guarding from each corner.

Lobby Module

The comprehensive Victofire Lobby Modules are installed in a corridor or lobby and the system includes manual call points, Hooter, Public Announcement Speakers, and microphones.

 

Following are the solutions that communicate with lobby modules.

Heat/Smoke detector

Lobby modules are interfaced with smoke/Heat detectors which are installed on every floor along with the electrical shaft.

Public address speakers

The speakers will be embedded in every lobby, which will impart the message from the mic near the fire alarm panel.

Public address speakers

The speakers will be embedded in every lobby, which will impart the message from the mic near the fire alarm panel.

Hooters

Lobby modules include audio annunciators which represent the active devices and are connected to a hooter with an 80dB sound level.

Manual call points

Through built-in manual call points that have a resettable trigger mechanism. A resident can manually pass the message to a control room if he/she spots a fire emergency.

Sprinkler system

A sprinkler system with the Flow switch monitoring unit. It splashes water when it triggers rapidly increasing heat around it.

Detectors in every flat.

Flat modules

The Comprehensive Vectofire Flat Modules are installed in every flat and are linked up with smoke and heat detectors that are mounted in every flat. Likewise, Flat modules are also connected to LPG Gas Leak detectors, Panic Switch, PIR-based Motion Sensors, Occupancy Sensors, and Flow Switch of the Sprinkler System. The connection is made with just 2 cables throughout the apartments.